FIRE PROTECTION ENGINEERING
Automatic Sprinkler
Systems
Sprinkler layout and coverage production support built on your engineer’s hazard classification and
design basis.
Our Founding and Mission
Introduction
NexMEP Global LLC provides automatic sprinkler system production support to U.S. MEP consulting firms working across commercial, residential, multifamily, healthcare, hospitality, industrial, institutional, and mixed-use projects. Our team functions as an extension of your engineering staff, carrying sprinkler layout, piping routing, and coverage documentation from concept through construction documents while your licensed fire protection engineers retain full design authority and stamp responsibility. We work inside your Revit and AutoCAD standards, your hazard classification approach, and your review process, so the output reads as if it came from your own production floor.
This is production capacity, not outsourced design. Every sprinkler head placement, pipe route, and coverage diagram we produce is built to be reviewed, redlined, and stamped by your engineer of record. Your firm determines hazard classification, sprinkler type, and system design approach; our role is to carry that design intent through detailed modeling and construction documentation at the pace your project requires, always working within the specific NFPA 13, 13R, or 13D design basis your engineer has established.
DESIGN ACCURACY & COMPLIANCE
Why This Service Matters
Sprinkler coverage is one of the most tightly regulated layout exercises in building design, governed by specific spacing, obstruction, and clearance rules that leave little room for interpretation once a hazard classification and design density are set. At the same time, sprinkler piping and head placement must be coordinated with architectural ceiling design, structural framing, and every other overhead system competing for the same space, making this a task that is simultaneously rule-bound and coordination-intensive.
Firms that lack the internal bandwidth to carry detailed sprinkler layout through multiple design phases face a difficult choice: slow down other active projects or push deadlines and absorb the client relationship risk that comes with missed milestones. Production support closes that gap without asking your firm to compromise on technical oversight, keeping coverage layout, pipe sizing, and hydraulic design data synchronized throughout the design process while your engineer retains full control over hazard classification and design approach.
Our Capabilities
Schematic to CD Production
Full design development and construction document preparation ready for permit and fire marshal submission.
RCP Ceiling Coordination
Sprinkler head layouts precisely coordinated with architectural reflected ceiling plans and light fixtures.
Branch & Cross Main Routing
Optimized piping distribution networks including remote area identification support.
Obstruction & Clearance Analysis
Dedicated clearance checks for structural beams, mechanical ductwork, and overhead obstructions.
Special Coverage Layouts
Custom configurations for high-piled storage, sloped/peaked ceilings, and extended coverage heads.
Existing System Modifications
Thorough documentation of existing sprinkler layouts to ensure continuous code-compliant coverage during retrofits.
Calculations
Engineering Calculations
Calculation methodology built for accurate, traceable HVAC equipment sizing.
NFPA Spacing & Obstruction Backup
Sprinkler spacing verification against NFPA 13 maximum coverage limits, obstruction clearance documentation, and hydraulic pipe sizing alignment.
Multi-Hazard Zone Summaries
Multi-hazard classification summaries by area, cross-referenced to layouts with explicit head-to-head spacing metrics for quick engineering review.
Calculations
Systems We Support
Ventilation-related calculation support includes outdoor air rate compilation.
Wet & Dry Pipe Systems
Standard, quick-response, and specialized freeze-protected configurations.
Pre-Action & Deluge Systems
Specialized protection for mission-critical, high-value, or hazardous environments.
Residential NFPA 13R & 13D
Dedicated residential sprinkler system layouts for single and multi-family units.
High-Piled & Cold Storage
In-rack, ceiling-only, and dry/antifreeze layouts tailored to commodity storage.
Special Architecture Protection
Tailored coverage strategies for covered mall common areas and high-ceiling atriums
Occupancy Hazard Classes
Production support across Light, Ordinary, and Extra Hazard classifications.
Our production capabilities accommodate diverse structural conditions and hazard tiers, ensuring fully coordinated fire protection models from high-rise towers to specialized industrial complexes.
Calculations
Software, Workflow & Coordination
Rigorous backup calculations formatted directly for permit submission and QA/QC documentation.
Software & Production Workflow
Modeled directly in Autodesk Revit and AutoCAD MEP using your firm’s templates and CAD standards. Integrated seamlessly into BIM 360 or Autodesk Construction Cloud environments, our workflow utilizes phase-based internal checkpoints and active model logs to track hazard classification decisions.
Revit & AutoCAD Coordination
Advanced Navisworks clash detection is performed before returning models to your team. We verify sprinkler placement against architectural RCP elements (lighting, diffusers) and resolve structural framing obstructions proactively, clearly flagging conditions requiring engineer-directed supplemental heads.
Calculations
Systems We Support
Expertise across diverse equipment lines, hybrid configurations, and complex Electrical setups.
Revit & AutoCAD Sets
Coverage Floor Plans
Riser & System Schematics
Coordination & QA Backup
Need Scalable Sprinkler Production Support?
Partner with NexMEP Global LLC to extend your fire protection modeling capacity with code-accurate, permit-ready sprinkler layouts.
Our Core Philosophy
Typical Project Types
Commercial & High-Rise
Corporate offices, commercial towers, healthcare, and hospitality facilities.
Educational & Multi-Family
K-12 schools, higher education campuses, multi-family housing, and mixed-use sites.
Warehouse & High-Piled Storage
Industrial facilities requiring storage commodity classification alignment.
Tenant Improvement & Retrofits
Existing building sprinkler upgrades and adaptive reuse modifications.
Calculations
QA/QC Process
A rigorous, multi-tiered review structure ensuring accurate, clear, and error-free submittals.
Multi-Tier Technical Checks
Production self-checks and peer reviews evaluating head placement, hazard rules, and obstruction clearances.
Interdisciplinary Clash Audits
Rigorous Navisworks audits confirming complete clash resolution against architectural and structural systems.
Independent Spacing Audits
Secondary spot-checks of maximum head coverage distances and floor plan area accounting before delivery.
Why NexMEP Global LLC?
NexMEP Global LLC brings a dedicated production team with practical experience across standard and specialty ventilation systems, a consistent U.S. code and standards focus, and a multi-level QA/QC process that reduces rework during your engineer’s review cycle.